JeremyBP wrote:I'm also going to upload my initial slic3r profiles for people to look at.
BenJackson wrote:Collapsing infill is probably due to not enough shells. I get ok surface results with 2 shells with 0.5mm nozzle and 0.4mm layer heights, but with 0.35mm nozzle and thin layer heights most people use 3 shells. The first "shell" sags into the infill (unavoidably) the second one sags into the first but the 3rd is generally nice and smooth.
Users browsing this forum: No registered users and 43 guests