Page 1 of 2

STL files for Rotational Adapter

PostPosted: Sat Mar 14, 2015 3:34 pm
by bloq
Hey all,

does anyone have stl files for the Rotational Adapter for the buildlog laser? i was able to open the step file from http://www.buildlog.net/wiki/doku.php?id=rotational but i am not too familiar with that tool and i am not sure how to export the single parts to stl. Any help is appreciated : )

thanks!
tm

Re: STL files for Rotational Adapter

PostPosted: Sun Mar 15, 2015 8:56 pm
by mattrsch
Here you go:

Re: STL files for Rotational Adapter

PostPosted: Thu Mar 19, 2015 7:45 am
by bloq
awesome! thanks!

Re: STL files for Rotational Adapter

PostPosted: Sat May 09, 2015 6:38 am
by bloq
Hey : )

is it possible that some parts are missing? There are two small wheels on the left side of this image
http://www.buildlog.net/blog/wp-content ... rot_01.jpg
which are not included ...

thank you very much

Andre

Re: STL files for Rotational Adapter

PostPosted: Sun May 17, 2015 4:15 pm
by rsm5178
Andre,

Any update on this or did you just make it work?

Rich

Re: STL files for Rotational Adapter

PostPosted: Mon May 18, 2015 4:09 am
by mpeele
You can order Bart's parts from Ponoko, all of the stl files are there under Barts name. I ordered a set and think they were around $40 or so.

Re: STL files for Rotational Adapter

PostPosted: Mon May 18, 2015 4:18 am
by bloq
sounds good! Where can i find them? I never printed at ponoko and did not find them ...

Re: STL files for Rotational Adapter

PostPosted: Mon May 18, 2015 3:19 pm
by mpeele
There is a good reasion you could not find them there because they are actually here ....

https://www.shapeways.com/shops/buildlog

My bad

Re: STL files for Rotational Adapter

PostPosted: Mon May 18, 2015 4:43 pm
by rsm5178
Can you download the STL files from that site?

Didn't see the option.

Rich

Re: STL files for Rotational Adapter

PostPosted: Sun May 24, 2015 8:53 pm
by mpeele
There is a file containing a complete 3D model in the rotational engraver wiki.