Kabelschlepp order Question

Bearings/Motors/Belts/Gears/Etc.

Kabelschlepp order Question

Postby J45on » Fri May 13, 2011 6:47 pm

Is there any alternative to the Kabelschlepp carriers ?
I just cant get my head around the uk order page :( sorry it's confusing me
I can find reference to "0132" and "KR20" but not the 10 in between ie: 0132-10KR20 what does the "10" stand for ?
I also cant find anywhere to specify the no of links "50 Links" only length in mm
What are the rough dimensions ?
J45on
 
Posts: 258
Joined: Thu Mar 31, 2011 11:30 am
Location: Kent,united kingdom

Re: Kabelschlepp order Question

Postby naPS » Fri May 13, 2011 7:07 pm

The local vendor here was very helpful when I placed my order for the cable carriers. Have you tried giving yours a call?

As an alternative, if they suck, I have 3 extra sets of both the X and Y cable carriers here at my house. I was planning on using them for future laser builds for friends, but could part with one if it's very difficult for you to source. I don't think USPS shipping is all that bad to the UK.
naPS
 
Posts: 202
Joined: Sat Apr 09, 2011 1:53 am

Re: Kabelschlepp order Question

Postby J45on » Fri May 13, 2011 8:48 pm

Thank you naPS for the offer :D
I will try calling my local vendor next week,I will let you know what happens.
When you ordered yours did you just quote the part no from the BOM ? ie: P/N 0132-15KR37 x 34 Links + FA/MA
J45on
 
Posts: 258
Joined: Thu Mar 31, 2011 11:30 am
Location: Kent,united kingdom

Re: Kabelschlepp order Question

Postby naPS » Fri May 13, 2011 9:32 pm

Yup, I just read them what was on the post, and they knew what I was looking for. They (Motion Industries) had to actually call Kabelschlepp to get the price, but it only took them about 15 minutes or so to generate a quote for me.
naPS
 
Posts: 202
Joined: Sat Apr 09, 2011 1:53 am

Re: Kabelschlepp order Question

Postby J45on » Fri May 13, 2011 9:54 pm

I have actually found out the answers to most of my questions from the german kabelschlepp website :roll: the UK site was no help
http://kabelschlepp.de/en/products/cabl ... index.html
J45on
 
Posts: 258
Joined: Thu Mar 31, 2011 11:30 am
Location: Kent,united kingdom

Re: Kabelschlepp order Question

Postby soehler » Fri May 13, 2011 11:14 pm

NaPS

PMed you, need your help :-)

J45on wrote:Thank you naPS for the offer :D
I will try calling my local vendor next week,I will let you know what happens.
When you ordered yours did you just quote the part no from the BOM ? ie: P/N 0132-15KR37 x 34 Links + FA/MA
soehler
 
Posts: 69
Joined: Mon Apr 11, 2011 1:23 am


Return to Mechatronics

Who is online

Users browsing this forum: No registered users and 7 guests

cron