bdring wrote:Be aware that all R4ZZ 1/4" bearings are not exactly 0.250" I.D.. They are actually 0.2465 I.D. When you see fractions used for bearings you need to check the actual size. That holds true for a lot of things like pipe, conduit etc. Blame our English measurement system. Precision 0.250 shafting will not fit.
bdring wrote:Be aware that all R4ZZ 1/4" bearings are not exactly 0.250" I.D.. They are actually 0.2465 I.D. When you see fractions used for bearings you need to check the actual size. That holds true for a lot of things like pipe, conduit etc. Blame our English measurement system. Precision 0.250 shafting will not fit.
bdring wrote:The nuts can be frustrating. Tim did a great job of listing the nuts in the build instructions, but you will miss some. Regardless, you will probably want to add your own mods later and the post assembly nuts will be needed.
We almost need the instructions to go step by step on each piece where it says put 5 nuts in front of you. Install piece x. If you still have nuts in front of you, you screwed up. Stop, and go back a step.
Dirk, if you want access to edit the build instructions, please let me know.
I have said before.... While the post nuts are more expensive, you will be more than happy to drop $5 bills into the slots rather than take apart at some point.
Users browsing this forum: No registered users and 35 guests