by happyhour » Mon Jun 10, 2013 8:27 pm
Hi
I started purchasing parts to build the x.2 laser last year as a new project for myself. Unfortunatly I got the opertunity to start another project that has kind of been a dream project for a while. I have always wanted to restore a C3 corvette and I happend to have on fall into my lap, so i have sidelined the x.2.
I have decided that I would like to sell of what I have invested in laser to re-coop some funds for the vette. So here is what I have
I have all the aluminum extrusions, brackets, handles, hinges and nuts from Misumi
HFS52020160 ALUMINUM FRAME USA172859801001 1
HFS52020730 ALUMINUM FRAME USA172859801010 3
HFS52020960 ALUMINUM FRAME USA172859801011 3
HFS5202090 ALUMINUM FRAME USA172859801012 1
HFS52040960 ALUMINUM FRAME USA172859801013 2
HBLFSN5 Assembly Brackets Slot Width 6 USA172859801014 45
HBLSS5 Assembly Brackets Slot Width 6 USA172859801015 2
HBLTS5 Assembly Brackets Slot Width 6 USA172859801016 2
HHDF19 Handles USA172859801017 1
HNKK55 NUTS FOR ALUMINIUM FRAMES USA172859801018 3
HNTP55 NUTS FOR ALUMINUM FRAME USA172859801019 10
HFS52020310 ALUMINUM FRAME USA172859801002 4
SHHPSL52 STAINLESS SLIP JOINT HINGES USA172859801020 1
SHHPSR52 STAINLESS SLIP JOINT HINGES USA172859801021 1
HFS52020230 ALUMINUM FRAME USA172859801003 1
HFS52020370 ALUMINUM FRAME USA172859801004 2
HFS52020440 ALUMINUM FRAME USA172859801005 2
HFS52020560 ALUMINUM FRAME USA172859801006 7
HFS52020580 ALUMINUM FRAME USA172859801007 2
HFS52020725 ALUMINUM FRAME USA172859801008 2
HFS52020728 ALUMINUM FRAME USA172859801009 1
The full hardware kit based on the assembly drawings. I also have the 30 or so parts that you can oly buy in bulk.
16 pieces #6904 - Machine screws, Phillips truss head, Stainless steel 18-8, #4-40 x 1/2"
15 pieces #6908 - Machine screws, Phillips truss head, Stainless steel 18-8, #6-32 x 1/4"
15 pieces #7656 - Machine screws, Phillips pan head, Stainless steel 18-8, #2-56 x 5/8"
30 pieces #1335 - Machine screws, Phillips pan head, Stainless steel 18-8, #6-32 x 3/8"
10 pieces #5175 - Metric machine screws, Phillips pan head, Stainless steel 18-8, 5mm x 0.8mm x 8mm
10 pieces #5123 - Metric machine screws, Phillips flat head, Stainless steel 18-8, 5mm x 0.8mm x 10mm
2 boxes of 100 #6407 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 10mm
50 pieces #6408 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 12mm
10 pieces #6409 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 16mm
10 pieces #6411 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 25mm
10 pieces #6412 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 30mm
15 pieces #6413 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 35mm
3 pieces #6452 - Metric socket cap, Stainless steel 18-8, 5mm x 0.8mm x 45mm
25 pieces #4794 - Metric hex lock nuts nylon insert, Stainless steel 18-8, 5mm x 0.8mm
10 pieces #2561 - Hex machine screw nuts, Stainless steel 18-8, #10-32
20 pieces #4107 - Hex lock nuts nylon insert, Stainless steel 18-8, #4-40
20 pieces #5563 - Flat washers, Stainless steel 18-8, #4
1 box of 100 #2946 - Flat washers, Stainless steel 18-8, #10
10 pieces #4070 - Lock washers, Stainless steel 18-8, #4
15 pieces #2955 - Lock washers, Stainless steel 18-8, #10
10 pieces #4076 - Lock washers external tooth, Stainless steel 410, #6
10 pieces #11933 - Square nuts, Stainless steel 18-8, #10-32
10 pieces #7721 - Hex jam nylon lock nuts, Stainless steel 18-8, 1/4"-20
10 pieces #6831 - Metric machine screws, Phillips pan head, Stainless steel 18-8, 3mm x 0.5mm x 8mm
20 pieces #6832 - Metric machine screws, Phillips pan head, Stainless steel 18-8, 3mm x 0.5mm x 10mm
10 pieces #6385 - Metric socket cap, Stainless steel 18-8, 3mm x 0.5mm x 30mm 1 Metric Spring Steel Shim - DIN 988, 1.0MM
1 Thick, 5MM ID, 10MM OD, Packs of 50
4 High-Cap Leveling Mount with Zinc-Plated Steel Stud, 10-24 X 1-1/2" L Thread, 1-3/16" Base Diameter
1 Steel Angle Ring, with 6 Holes, 4" Duct Diameter, 9/32" Hole
1 Zinc-Plated Grade 2 Steel Nylon-Insert Hex Locknut, 4-40 Thread Size, 1/4" Width, 9/64" Height, Packs of 100
I also have the right and left gantry ends and several lexan cut parts. The harware was $313 and the gantry ends cost me $50, plus all the other parts I cut. I will post pictures when I get home. Based on the assembly drawings you have all the parts to build the cabinet.
The first $300 takes it all.