FOR SALE Nylon Spacers and Nylon SHCS Kits

[reeser]

I finally bit the bullet and ordered the nylon spacers and nylon screws for the 2.x Laser.
I bought the last kit that General Specific had to offer but unfortunately the post office ate them before I received them.

I can supply the following:
4 pcs-.115 x .250 x .875 Nylon Spacers
2 pcs- .192 x .3125 x .125 Nylon Spacers
12 pcs- .192 x .3125 x .250 Nylon Spacers
2 pcs- .192 x .375 x .375 Nylon Spacers
6 pcs .192 x .375 x .875 Nylon Spacers
6 pcs 10-32 x 1" Nylon Socket Head Cap Screws
This is what the BOM calls for but I don't have a clue if the quantities are correct. I trust they are but I haven't got that far in my own build to know since the spacers were holding me up.
I also had to order a package of 10 pcs of the 1/8"NPT x 3/16" ID Barbed Brass Fitting for the air assist nozzle (See Drawing B18013)
If you want the spacers only they are $7.00 + 2.50 Mailing. (US only). International I will find out the actual cost and charge that +.60 for a padded envelope.
If you want a brass barb they are $1.50 ( SOLD OUT OF BRASS BARBS)
I've messed around three weeks trying to scrounge this stuff up so I hope I can help someone else.
Of everything on the BOM this stuff was the hardest to find without buying big quantities.

Anyone interested send me a PM.

Dick

[bloq]

Hey Dick,

i am very interested in the spacers : ) I live in germany so it would be great if you can find out something about shipping. I think the cheapest option makes sense : )
I do not yet know if i need the brass thing but i think it would make sense ....
thanks

tm

[GeneralSpecific]

The quantities in the BOM should be good to go; they worked for me, at least.

tm - You will want the brass barb only if you plan on making/using the air assist nozzle that Dick mentioned. Otherwise you won't need it. $1.50 is a good price; you would pay twice as much at a local hardware store.

[bloq]

Thank you for your comment, generalspecivic. I already ordered and took the brass barb because i had the same thought : ) it is really
good to know that there are still other builders here who can help : )

[neuman5022]

Hi Dick,

Do you still have a kit for me ?

Did PM you - but perhaps you missed it.

Cheers

Isaac

[reeser]

Hi Isaac:

Never received the PM, sorry.
I do have spacers.
Let me know if you want brass barb and send me your address.

My paypal address is reeser@gemair.com

Regards,
Dick

[neuman5022]

Hi Dick,

Thanks for your reply.

Sent you an e-mail and another PM - my last PM is stuck in output box - have no idea why.

Cheers

Isaac

[cvoinescu]

That's normal -- PMs sit in your Outbox until read by the recipient. Then, they move to your Sent folder. So if it's in the Outbox, it just means the other person has not seen it yet, not that there was a problem.

[neuman5022]

Hi,

Thank you for your explanation it is very much appreciated.

You may help me with another matter - if you'll be so kind - I have some troubles using the search engine in this forum.Every time I look for something I get the massage that the word is "too common" - and for the life of me I have no idea what I am doing wrong.

I am a member in other forums with same/similar appearance, and never had a problem looking for what I need.

So it must be something I am doing wrong here - but no idea what.

Many thanks

Isaac

[fastenere]

SOCKET HEAD CAP SCREWS
https://www.fastenere.com/collections/socket-drive-screws?_=pf&pf_t_head_style=Socket%20Cap