Page 1 of 1

Laser 2.x Parts - Australia - SOLD

PostPosted: Mon Mar 14, 2016 5:52 am
by asb79
For prospective Australian builders.

I started a 2.x build in 2011 that was parked shortly after. We've just moved house and my workshop space is at a premium so I am reluctantly selling my 2.x laser project.

I have built the frame using Misumi 2020 extrusion. I scaled up the original dimensions to obtain a work area approximately 450x900

Included in the sale are the following items;
- Frame (as pictured)
- Plastics kit
- Mechatronics kit (belt, Pulleys, steppers etc)
- Hardware kit
- Linear bearing (metal parts) kit
- Electronic module kit
- Laser optics, mirrors and lenses, holders, 3 digit power indicator, switching 5v power regulator
- Buildlog air nozzle
- Misumi hardware, T-nuts, brackets, hinges etc
- CNC routed mounting and back panel

All parts were purchased from Bart (Except Misumi extrusions and hardware) when he was still providing kits.

To complete the laser you would require, the side paneling, A 40W CO2 laser and ancillary equipment, a controller and some makerslide for the linear rails.

Asking $650 (Australian Dollars) for everything pictured. Pickup from Melbourne outer suburbs.

Please feel free to ask any questions.

Re: Laser 2.x Parts - Australia

PostPosted: Tue Mar 29, 2016 4:14 am
by asb79
Has been sold