Metal Parts for Laser 2.X (.dxf files)

Where you can find stuff.

Metal Parts for Laser 2.X (.dxf files)

Postby rsm5178 » Thu Apr 21, 2016 5:08 pm

Hey Laser Community,

In case anyone would like to source their own plates, here are the flat plate layouts for the laser 2.x that I made from the model a few years back.

*****IMPORTANT******It is very important to use 5052 grade aluminum for the plates with bends. The flat plates can be 6061 grade. All plates are 1/8" thick in design.

I preferred to water jet the ones I made, but a laser should also work the same.

You will also need:

1. PEMS (I used selfclinchdirect.com which can be pricey in small quantities due to shipping)
2x----TR-SOS-440-12
3x----TR-CLS-632-2
4x----TR-AC-0420-2

2. Way to bend the plates (brake press is preferred)

3. Way to press in the PEMS (hydraulic press is preferred)

Thanks,

Rich
Attachments
2.X Metal Parts.zip
(27.5 KiB) Downloaded 1132 times
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Return to Sources for stuff

Who is online

Users browsing this forum: No registered users and 6 guests

cron