Page 1 of 1

PG35 Color Codes ?

PostPosted: Sat Feb 23, 2013 2:58 pm
by Looper
Got all my parts printed out to mount the PG35 to the ORDBot and the only thing holding me back is the color codes on the stepper. I cannot seem to find a documented wiring diagram for the PG35 and don't want to mess up the crimp connectors trying different patterns. Does anyone have the info?

Been here but stil does not list the PG35 color codes
http://www.linengineering.com/contents/ ... tions.aspx
And here
http://digital.ni.com/public.nsf/allkb/ ... CE005D833B

So if a NEMA17 had a Red (A), Blue (A-), Green (B), Black (B-) and a PG35 had Brown, Yellow, Orange, Black How do they pair up?

Thanks

Re: PG35 Color Codes ?

PostPosted: Sat Feb 23, 2013 4:17 pm
by Enraged
easiest way to find the pairs is to connect two wires together, and try to spin the motor. If it's hard to spin, the wires are a pair.

Re: PG35 Color Codes ?

PostPosted: Sat Feb 23, 2013 10:04 pm
by Zat German
You can't spin it because it's a geared stepper. Here's the datasheet:

Image

Re: PG35 Color Codes ?

PostPosted: Sun Feb 24, 2013 9:28 am
by flurin
NEMA 17 (Smart Automation):

http://www.smartautomation.com.cn/Produ ... icleID=497

StpperMotor.gif
StpperMotor.gif (4.02 KiB) Viewed 8067 times


Green = 1A
Black = 1B
Blue = 2A
Red = 2B

Wiring for PGS35 (according to the specs):

Black = A1
Brown = A2
Orange = B1
Yellow = B2

I suppose 1A = A1 etc.

Therefore:

NEMA 17 > PG35

Green(1A) > Black(A1)
Black(1B) > Orange(B1)
Blue(2A) > Brown(A2)
Red(2B) > Yellow(B2)

Additional infos:

http://reprap.org/wiki/RAMPS_1.4#Wiring

http://reprap.org/wiki/Stepper_Motors#NEMA_17_Motors