A little EZstruder adapter...

General discussion of 3D printers

A little EZstruder adapter...

Postby DonaldJ » Tue Nov 05, 2013 11:08 am

This could easily be modified to work on any carriage assembly.

I tried 3mm filament with my beefy stepper but the filament stripped. It's either not enough spring pressure or drive roller teeth that are not quite sharp enough. Probably both.

A very neat feature of the EZstruder is the access port on the right side to clean the teeth.

http://www.thingiverse.com/thing:177550

pic3.JPG
DonaldJ
 
Posts: 21
Joined: Thu Apr 11, 2013 4:31 am

Re: A little EZstruder adapter...

Postby flickerfly » Wed Nov 27, 2013 3:31 pm

I'm also a big fan of the little cleaning port on the side. I'll blow in it sometimes. I also have a little baby bottle cleaner of the right size to jam in and clean it out.
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA


Return to 3D Printer General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest