Missing pulley in BOM?

Questions, Suggestions, Tips, Etc

Missing pulley in BOM?

Postby BenJackson » Sun Jan 29, 2012 10:26 pm

Seems like the BOM is short one A_6T16M020DF6005 (5mm bore MXL pulley) for the Z lift. The BOM has pulleys enough for X, Y and it has the larger one for Z but not the one that goes on the stepper.

Speaking of steppers it's also short the Z stepper.
BenJackson
 
Posts: 522
Joined: Fri Apr 15, 2011 6:13 pm

Re: Missing pulley in BOM?

Postby Greolt » Mon Jan 30, 2012 12:55 am

It was my understanding from casually reading about the 2.x, that the standard configuration has a manual Z axis.

With the stepper driven Z axis being an optional extra.

Perhaps this explains those parts not being part of the standard BOM.

Greolt
Greolt
 
Posts: 127
Joined: Tue Nov 29, 2011 7:22 am

Re: Missing pulley in BOM?

Postby bdring » Mon Jan 30, 2012 3:37 am

I think the qty is right
(6) 1/4 bore 20 tooth (2) Y shafts and (4) Z lead screws
(2) 5mm 20 tooth one for X motor and one for Z motor
(1) 1/4 bore 48 tooth for the Z lead screw.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA


Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 13 guests

cron