Page 1 of 14

Possible 2.x laser Kits Batch #7

PostPosted: Wed Nov 07, 2012 8:39 pm
by bdring
I am working out the timing of doing a batch #7 of 2.x kits. The long lead item is new sheet metal parts which take about 4 weeks to get. I have not ordered those parts yet. If I order those parts, I will add a post to this topic regarding that. I also have a lot of other commitments I need to consider.

The kits will be the same as batch #6. Here are links to the details on that kit.

http://store.makerslide.com/index.php?m ... ucts_id=70
http://www.buildlog.net/cnc_laser/store ... _parts.php

I do not take pre-orders or reservations and there is no waiting list. There is no guaranty that I can get you a kit, so consider that before you start buying parts.

Subscribe to this topic or follow me on twitter (@buildlog) to be notified about the kits

Re: Possible 2.x laser Kits Batch #7

PostPosted: Sat Nov 10, 2012 3:59 pm
by Flim
I'm in ....

Re: Possible 2.x laser Kits Batch #7

PostPosted: Sun Nov 11, 2012 11:30 pm
by All3n
I am also interested.

Re: Possible 2.x laser Kits Batch #7

PostPosted: Sat Nov 17, 2012 6:51 pm
by happyhour
I have been able to make most of the parts from the list with my cnc mill. The only parts I really need is the 2 gantry ends, C30001-013 and -014 and the lense mounting plate C14002-001. If you happen to have a couple of these I also need some stuff you have in the store, I would like to bundle is all in one purchase if possible.

Re: Possible 2.x laser Kits Batch #7

PostPosted: Sun Nov 18, 2012 6:27 pm
by mondo50m
Same here, just need the gantry end plates.

Re: Possible 2.x laser Kits Batch #7

PostPosted: Mon Nov 26, 2012 1:12 am
by All3n
Just wondering if I missed out on Batch #7? I though maybe I read someone was using parts from this round.

Thanks!

Re: Possible 2.x laser Kits Batch #7

PostPosted: Wed Dec 05, 2012 1:06 am
by liqdfire
I would be in for a kit.

Re: Possible 2.x laser Kits Batch #7

PostPosted: Wed Dec 05, 2012 4:41 pm
by SSW
I'll vote for that too! :D

Re: Possible 2.x laser Kits Batch #7

PostPosted: Wed Dec 05, 2012 5:56 pm
by TheRulesLawyer
I'm interested in picking up a kit too.

Re: Possible 2.x laser Kits Batch #7

PostPosted: Wed Dec 05, 2012 6:37 pm
by mondo50m
Any way to get just the gantry ends? I have everything else and can go no further without these.

Milt