The hack.rva build is progressing and now I need to buy a 24V power supply. The question is, how much amperage? We are using the Inventables NEMA 17 steppers (1.7A per phase). The best description I've been able to find for sizing a power supply is from
http://www.homemodelenginemachinist.com ... cnc-18304/Based on that description, and assuming the steppers are "full-winding" motors, the x and y motors would need a total of 1.7A/phase * 1/3 * 2 motors = 1.2 Amps. Adding something for the 3 axis laser interface board, this would indicate that a supply rated at 2 amps would be fine. However, this seems pretty low. Has anyone tried a 24V power supply this small for a 2.x build? If not, what would be a reasonable size?
Thanks,
Alan