X Cable Carrier

Questions, Suggestions, Tips, Etc

X Cable Carrier

Postby bdring » Fri Mar 11, 2011 4:27 pm

Why is there only one cable carrier on the BOM?

The cable carrier listed is for the Y axis. It carries the motor and limit switch wires. The X axis cable carrier is only required if you want optional air assist. It only carries the air hose. I do not want to load up the BOM with optional items. The part number I used for the X axis is Kabelschlepp p/n 0132-10KR20 x 50 Links + FA/MI. You would also need to buy the nozzle and some 3/16 ID hose. I would strongly suggest using very soft tygon hose with this carrier or the carrier might not run at it's intended radius. The standard parts have all holes required to mount the carrier.
"If you didn't build it, you will never own it."
Site Admin
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 1 guest