by cpdude » Fri May 27, 2011 2:07 am
I was able to test fire the laser twice at a piece of wood a few inches from the end of the laser tube. The first test firing worked perfectly. However, during the second test firing I saw a couple of inches of flame come from the end of the laser tube. Now the laser isn't firing at all. The connections between the post and the metal rings
I'm wondering if something fried on the laser tube or the power supply. Anyway, before I start undoing things I'd love to hear some thoughts from you all. Any help with diagnosing the problem would obviously be very appreciated.
Thanks,
Brian
2.x laser ( Mach3 | SmoothStepper | FSE RetinaEngrave)| DIY CNC Router (EMC2) | Prusa I3 3d printer | Building a Wolfstock deta printer | Rhino v5