DSP Friendly Electronics Kit

Questions, Suggestions, Tips, Etc

DSP Friendly Electronics Kit

Postby bdring » Wed Sep 28, 2011 11:48 pm

The current electronics kit targeted the Mach3 setup. A lot of people are going straight to the Thunder Laser DSP, so I am creating an alternate kit for those people. It will be the same except the following items will be removed.

  • The Pot
  • The Pot Knob
  • The red push button
  • The pot/pwm switch
  • The (2) D connectors.

The rear panel is also changing to the USB friendly version. The DSP ships with some other the bulkhead mount cables. I found a few other similar cables, so i tried to make a universal cutout.

If you just want a panel for your current setup, send me an email.

IMG_0775.JPG
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: DSP Friendly Electronics Kit

Postby dirktheeng » Thu Sep 29, 2011 12:57 am

Bart,

where did you get the pannel mount USB cable? I need to get several for some of the projects I am working on.
dirktheeng
 
Posts: 616
Joined: Thu Sep 09, 2010 4:49 pm

Re: DSP Friendly Electronics Kit

Postby bdring » Thu Sep 29, 2011 2:06 am

They came with my Thunderlaser controller. There are a thousand sources, but I bought some here for work once.

http://www.datapro.net/products/usb-pan ... cable.html

For those without a DSP there are two because one is for the connection to a computer and one is for a flash drive.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA


Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 14 guests

cron