MakerSlide Carriage Plate

General questions and comments.

MakerSlide Carriage Plate

Postby stonycraft » Fri Mar 01, 2013 5:20 pm

Hi,
Would someone know the W x H size of the MakerSlide Carriage Plate please.
I also assume the edge of the wheel shell is in line with the edge of the plate in this attached image?.
Finally what is the diameter of the Wheel Shell.
Many thanks
Attachments
carriage.png
stonycraft
 
Posts: 48
Joined: Thu Feb 28, 2013 4:28 pm
Location: UK

Re: MakerSlide Carriage Plate

Postby bdring » Fri Mar 01, 2013 5:46 pm

There is a wiki I started a while back. I add to it as question come up.

http://www.makerslide.com/wiki/doku.php?id=start
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: MakerSlide Carriage Plate

Postby stonycraft » Fri Mar 01, 2013 5:57 pm

carriage link to PDF seems broken.
Wheel info I now have.. thanks
stonycraft
 
Posts: 48
Joined: Thu Feb 28, 2013 4:28 pm
Location: UK

Re: MakerSlide Carriage Plate

Postby stonycraft » Fri Mar 01, 2013 6:04 pm

googled and found a sketchup file.. seems its 160 x 90 mm
stonycraft
 
Posts: 48
Joined: Thu Feb 28, 2013 4:28 pm
Location: UK

Re: MakerSlide Carriage Plate

Postby stonycraft » Fri Mar 01, 2013 6:08 pm

wheels arent quite flush to edge as centre hole 12.7 and 10mm from plate edges.
stonycraft
 
Posts: 48
Joined: Thu Feb 28, 2013 4:28 pm
Location: UK


Return to MakerSlide General Discussion

Who is online

Users browsing this forum: No registered users and 14 guests

cron