Page 1 of 2
Handheld LCD control unit for AWC608 DSP
Posted:
Fri Sep 06, 2013 8:14 pm
by Speedythinker
Hello folks:
I'd to introduce a new toy that I made. It is a handheld LCD control unit to replace the panel mounted type for the Lightobject AWC608 DSP controller.
See a short demo on youtube:
http://www.youtube.com/watch?feature=pl ... doXxYy0Tbc10 unit should be available in about a month and I'm taking $100 for early bird purchase. After that, I'll sell it around $135~$145 on my website
Regards,
Marco
Lightobject.com
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Mon Sep 09, 2013 5:51 pm
by pourcirm
What kind of cost would I be looking at if I wanted to get this unit and just the AWC608? I have Bart's Laser Interface Board already so I only need those two additional pieces to max out my control capabilities.
Thanks.
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Mon Sep 09, 2013 9:27 pm
by Speedythinker
http://www.lightobject.com/AWC608-Comme ... -P321.aspxAdd $45 to upgrade the panel mounted LCD to the handheld type. Note that you will get only one LCD unit but not both with the extra amount you paid.
The handheld unit is still under production and it need about a month to receive it
Marco
Lightobject.com
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Mon Sep 09, 2013 10:04 pm
by pourcirm
Do you sell a version without the green control board? I don't really think I need that since I already have the BuildLog.net control board to connect to.
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Tue Sep 10, 2013 4:11 am
by Speedythinker
If you don't need the green board (the main board), then for sure you don't need the AWC608 DSP from us. You must have your own.
The LCD works only on the AWC608 board, nothing else
Marco
Lightobject.com
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Wed Feb 26, 2014 3:45 am
by pourcirm
Is this handheld controller deal still available? I've done more research and cleared up the stupid questions I was asking previously and I'm ready to move forward with the DSP to finish my build.
Thanks,
Ryan
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Thu Feb 27, 2014 8:14 am
by Speedythinker
Hello Ryan:
All handheld LCD unit sold out. The next batch of 50 units should come in about a month. Currently it is under production
Marco
Lightobject.com
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Thu Feb 27, 2014 11:14 am
by asb79
Hi Marco,
Does the hand controller add any extra functionality or features over the Panel mounted LCD?
Cheers
Anthony
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Thu Feb 27, 2014 7:16 pm
by Speedythinker
It added no extra features in additional to the panel mounted LCD unit.
FYI, I'll launch a 7" full touch screen LCD unit for a new model DSP in about 2~3 months. Stay tuned
Marco
Lightobject.com
Re: Handheld LCD control unit for AWC608 DSP
Posted:
Fri Aug 08, 2014 2:23 am
by pourcirm
Hey Marco,
Just curious if you had any more info to share about the LCD you mentioned here a few months ago. I'm working on the electronics of my build and I'm ready to knock out the controller. I'm probably going to be buying some mounts from you soon so I was hoping to place a single order for what I need. Worst case I'll probably buy your handheld unit, but if the LCD is something cool I may consider it instead.
Thanks,
Ryan