2012 DSP Laser Issues

Discussions and help on this commercial controller.

Moderator: twehr

Re: 2012 DSP Laser Issues

Postby mattrsch » Thu Dec 15, 2011 4:22 am

I did mine before I saw this post. It was pretty easy. I haven't seen the fire on reset problem, and I haven't noticed any other side effects. I have only used it for a couple days so far, however.
mattrsch
 
Posts: 98
Joined: Wed Jul 21, 2010 5:09 pm

Re: 2012 DSP Laser Issues

Postby Speedythinker » Thu Dec 15, 2011 6:56 am

I tried the 2nd modified card and it worked as expected. There was no unwanted fire after power to the main board was cut off. I asked the programmer if there was any side effect by removing those 6 componenets off the board. The only thing that he mentioned was that it would disable the "TH". Since TH won't be used, so I think this is the solution.

Marco
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Previous

Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 1 guest

cron