Ordbot Spares

Topics Related to the ORD Bot Printer

Ordbot Spares

Postby grezmel » Wed Apr 01, 2015 10:22 pm

Hi, can anyone tell me where I can get spares from, specifically part number B17061 - Z lift blocks

Thanks Graham
grezmel
 
Posts: 7
Joined: Thu Oct 02, 2014 12:21 pm

Re: Ordbot Spares

Postby rsm5178 » Wed Apr 01, 2015 10:28 pm

I just hand drilled 3/8th inch cutting board and put these (see link) under it to add support and set the height.

( http://www.automationtechnologiesinc.co ... -and-right)

You could jut print them and get something good enough to work.

Rich
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: Ordbot Spares

Postby grezmel » Sun Apr 05, 2015 7:06 am

Thanks for your help. Isn't it possible to get original Ordbot spares ?
grezmel
 
Posts: 7
Joined: Thu Oct 02, 2014 12:21 pm

Re: Ordbot Spares

Postby madmike8 » Wed Apr 15, 2015 8:54 pm

Get the anti wobble kit... you'll be happier...

There are some printable versions of the blocks out there too...
madmike8
 
Posts: 43
Joined: Wed Oct 31, 2012 5:50 pm

Re: Ordbot Spares

Postby grezmel » Thu Apr 16, 2015 7:11 am

Where do I buy the anti wobble kit from?
grezmel
 
Posts: 7
Joined: Thu Oct 02, 2014 12:21 pm

Re: Ordbot Spares

Postby madmike8 » Thu Apr 16, 2015 2:41 pm

rsm5178 linked it above.


Here...
http://www.automationtechnologiesinc.com/products-page/3d-printer-machine-parts/z-lift-plate-left-and-right

or here...

http://www.ebay.com.sg/itm/3D-Printer-ORD-Bot-HadronZ-Lift-Plate-Left-and-Right-parts-/181567297952?pt=LH_DefaultDomain_0&hash=item2a464119a0

I'm redoing my Ordbot now, and will be reprinting the blocks needed with this.

http://www.thingiverse.com/thing:42260

PM your address and I'll mail you a couple if you don't have the ability to get them yourself.
madmike8
 
Posts: 43
Joined: Wed Oct 31, 2012 5:50 pm


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 6 guests

cron