Page 1 of 1

Ordbot Spares

PostPosted: Wed Apr 01, 2015 10:22 pm
by grezmel
Hi, can anyone tell me where I can get spares from, specifically part number B17061 - Z lift blocks

Thanks Graham

Re: Ordbot Spares

PostPosted: Wed Apr 01, 2015 10:28 pm
by rsm5178
I just hand drilled 3/8th inch cutting board and put these (see link) under it to add support and set the height.

( http://www.automationtechnologiesinc.co ... -and-right)

You could jut print them and get something good enough to work.

Rich

Re: Ordbot Spares

PostPosted: Sun Apr 05, 2015 7:06 am
by grezmel
Thanks for your help. Isn't it possible to get original Ordbot spares ?

Re: Ordbot Spares

PostPosted: Wed Apr 15, 2015 8:54 pm
by madmike8
Get the anti wobble kit... you'll be happier...

There are some printable versions of the blocks out there too...

Re: Ordbot Spares

PostPosted: Thu Apr 16, 2015 7:11 am
by grezmel
Where do I buy the anti wobble kit from?

Re: Ordbot Spares

PostPosted: Thu Apr 16, 2015 2:41 pm
by madmike8
rsm5178 linked it above.


Here...
http://www.automationtechnologiesinc.com/products-page/3d-printer-machine-parts/z-lift-plate-left-and-right

or here...

http://www.ebay.com.sg/itm/3D-Printer-ORD-Bot-HadronZ-Lift-Plate-Left-and-Right-parts-/181567297952?pt=LH_DefaultDomain_0&hash=item2a464119a0

I'm redoing my Ordbot now, and will be reprinting the blocks needed with this.

http://www.thingiverse.com/thing:42260

PM your address and I'll mail you a couple if you don't have the ability to get them yourself.