PG35 Color Codes ?

General discussion of 3D printers

PG35 Color Codes ?

Postby Looper » Sat Feb 23, 2013 2:58 pm

Got all my parts printed out to mount the PG35 to the ORDBot and the only thing holding me back is the color codes on the stepper. I cannot seem to find a documented wiring diagram for the PG35 and don't want to mess up the crimp connectors trying different patterns. Does anyone have the info?

Been here but stil does not list the PG35 color codes
http://www.linengineering.com/contents/ ... tions.aspx
And here
http://digital.ni.com/public.nsf/allkb/ ... CE005D833B

So if a NEMA17 had a Red (A), Blue (A-), Green (B), Black (B-) and a PG35 had Brown, Yellow, Orange, Black How do they pair up?

Thanks
Looper
 
Posts: 9
Joined: Sun Dec 02, 2012 3:57 pm

Re: PG35 Color Codes ?

Postby Enraged » Sat Feb 23, 2013 4:17 pm

easiest way to find the pairs is to connect two wires together, and try to spin the motor. If it's hard to spin, the wires are a pair.
Enraged
 
Posts: 439
Joined: Fri May 06, 2011 3:13 pm

Re: PG35 Color Codes ?

Postby Zat German » Sat Feb 23, 2013 10:04 pm

You can't spin it because it's a geared stepper. Here's the datasheet:

Image
Zat German
 
Posts: 141
Joined: Sat Feb 18, 2012 4:48 am

Re: PG35 Color Codes ?

Postby flurin » Sun Feb 24, 2013 9:28 am

NEMA 17 (Smart Automation):

http://www.smartautomation.com.cn/Produ ... icleID=497

StpperMotor.gif
StpperMotor.gif (4.02 KiB) Viewed 10012 times


Green = 1A
Black = 1B
Blue = 2A
Red = 2B

Wiring for PGS35 (according to the specs):

Black = A1
Brown = A2
Orange = B1
Yellow = B2

I suppose 1A = A1 etc.

Therefore:

NEMA 17 > PG35

Green(1A) > Black(A1)
Black(1B) > Orange(B1)
Blue(2A) > Brown(A2)
Red(2B) > Yellow(B2)

Additional infos:

http://reprap.org/wiki/RAMPS_1.4#Wiring

http://reprap.org/wiki/Stepper_Motors#NEMA_17_Motors
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland


Return to 3D Printer General Discussion

Who is online

Users browsing this forum: No registered users and 12 guests

cron