bad surface 1
My print quality has degraded recently. I can't get a good horizontal finish anymore. I thought it was a filament problem as I had recently switched rolls. However, I switched back to the original and the problem is still there but doesn't show up as bad due to the color I think. I have played with extruder and bed temperatures with no positive affect.
There is an unevenness even on the first layer on the glass. I can't feel any bobbles in any of the axis while moving. Belts are tight and rollers clean. The first layer has varying heights in patches. There seems to be a pattern to it. Also, streaks form perpendicular to the direction of fill on the first layer. They feel like ridges on top and look almost like cracks from the glass side.
It seems like it has to be an extruder issue but it seems to be feeding smooth and I haven't changed any of the Marlin calibrations. Here are a couple of not so good phone photos. Anybody experienced this?