STL files for Rotational Adapter

Bearings/Motors/Belts/Gears/Etc.

STL files for Rotational Adapter

Postby bloq » Sat Mar 14, 2015 3:34 pm

Hey all,

does anyone have stl files for the Rotational Adapter for the buildlog laser? i was able to open the step file from http://www.buildlog.net/wiki/doku.php?id=rotational but i am not too familiar with that tool and i am not sure how to export the single parts to stl. Any help is appreciated : )

thanks!
tm
bloq
 
Posts: 88
Joined: Mon Dec 29, 2014 9:15 am

Re: STL files for Rotational Adapter

Postby mattrsch » Sun Mar 15, 2015 8:56 pm

Here you go:
Attachments
Rotator Custom Parts.zip
All the custom parts
(697.9 KiB) Downloaded 1699 times
mattrsch
 
Posts: 98
Joined: Wed Jul 21, 2010 5:09 pm

Re: STL files for Rotational Adapter

Postby bloq » Thu Mar 19, 2015 7:45 am

awesome! thanks!
bloq
 
Posts: 88
Joined: Mon Dec 29, 2014 9:15 am

Re: STL files for Rotational Adapter

Postby bloq » Sat May 09, 2015 6:38 am

Hey : )

is it possible that some parts are missing? There are two small wheels on the left side of this image
http://www.buildlog.net/blog/wp-content ... rot_01.jpg
which are not included ...

thank you very much

Andre
bloq
 
Posts: 88
Joined: Mon Dec 29, 2014 9:15 am

Re: STL files for Rotational Adapter

Postby rsm5178 » Sun May 17, 2015 4:15 pm

Andre,

Any update on this or did you just make it work?

Rich
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: STL files for Rotational Adapter

Postby mpeele » Mon May 18, 2015 4:09 am

You can order Bart's parts from Ponoko, all of the stl files are there under Barts name. I ordered a set and think they were around $40 or so.
mpeele
 
Posts: 23
Joined: Sun Apr 18, 2010 9:38 pm

Re: STL files for Rotational Adapter

Postby bloq » Mon May 18, 2015 4:18 am

sounds good! Where can i find them? I never printed at ponoko and did not find them ...
bloq
 
Posts: 88
Joined: Mon Dec 29, 2014 9:15 am

Re: STL files for Rotational Adapter

Postby mpeele » Mon May 18, 2015 3:19 pm

There is a good reasion you could not find them there because they are actually here ....

https://www.shapeways.com/shops/buildlog

My bad
mpeele
 
Posts: 23
Joined: Sun Apr 18, 2010 9:38 pm

Re: STL files for Rotational Adapter

Postby rsm5178 » Mon May 18, 2015 4:43 pm

Can you download the STL files from that site?

Didn't see the option.

Rich
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: STL files for Rotational Adapter

Postby mpeele » Sun May 24, 2015 8:53 pm

There is a file containing a complete 3D model in the rotational engraver wiki.
mpeele
 
Posts: 23
Joined: Sun Apr 18, 2010 9:38 pm

Next

Return to Mechatronics

Who is online

Users browsing this forum: No registered users and 3 guests

cron