Topics Related to the ORD Bot Printer


Postby bdring » Fri Mar 23, 2012 3:24 am

Here is the MK7 adapter. It is a piece of heat treated 6061-T6 aluminum with two PEM studs. There are two extra holes in case you want to customize it. The studs are #4-40 because the M3 are harder to get in a short time, but I will supply the nuts.



Jeremy was kind enough to test it.

8-) Jeremy is a one man PR machine. He set one up for a potencial NBC news story and is taking it on the road to a few eastern HackerSpaces.
"If you didn't build it, you will never own it."
Site Admin
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: MK7

Postby JeremyBP » Fri Mar 23, 2012 3:29 am

The new MK7 plate is really very slick. The extruder mounts by the thermal barrier, and so eliminated having another bolt holding it in place (the bolt wasn't needed, IMO).
It's very flat, and very clean. Which is what I expected from Bart, as everything he designs is clean.
Compulsive Fabricator
Posts: 208
Joined: Fri Feb 10, 2012 3:37 am
Location: Oak Park, IL


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 1 guest